optically coupled isolator opi7002, opi7002rce, opi7010, opi7010rce OPI7320RCE, opi7340rce ? tt electronics plc issue c 10/2017 page 1 tt electronics | optek technology 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.telectronics.com | www.optekinc.com general note tt electronics reserves the right to make changes in product specifcaton without notce or liability. all informaton is subject to tt electronics own data and is considered accurate at tme of going to print. descripton: each opi7002 and opi7010 consists of an infrared emitng diode coupled to a npn silicon phototransistor. the led and sensor are encased in a black, low - cost plastc housing. pin spacing is compatble with standard dual - in - line packages. each OPI7320RCE and opi7340rce consists of an infrared emitng diode coupled to a npn silicon photodarlington. the led and sensor are encased in a high dielectric plastc housing. pin spacing is compatble with standard dual - in - line packages. the rce versions reverses the phototransistor emiter and collector pin - out. custom electrical, wire and cabling and connectors are available. contact your local representatve or optek for more informaton. applicatons: ? requiring high voltage isolaton between input and output ? electrical isolaton in dirty environments ? industrial equipment ? medical equipment ? ofce equipment features: ? 6 kv dc electrical isolaton ? inexpensive plastc housing ? choice of phototransistor or photodarlington output ? ul registered file no. e58730 ordering informaton part number led peak wavelength sensor isolaton voltage (,000) ctr min i f (ma) typ / max v ce (volts) max lead length / spacing opi7002 890 nm transistor 6 20 10 / 50 30 0.30" / 0.30" opi7010 100 OPI7320RCE 890 nm or 935 nm darlington 6 200 5 / 50 15 0.30" / 0.30" opi7340rce 400 inches [millimeters] dimensions are in: rohs opi7002, opi7010 2 3 1 4 opi7002rce, opi7010rce 2 3 1 4 2 3 1 4 OPI7320RCE, opi7340rce pin # led pin # transistor/ rce 2 cathode 3 collector / emiter 1 anode 4 emiter / collector
optically coupled isolator opi7002, opi7002rce, opi7010, opi7010rce OPI7320RCE, opi7340rce ? tt electronics plc issue c 10/2017 page 2 tt electronics | optek technology 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.telectronics.com | www.optekinc.com general note tt electronics reserves the right to make changes in product specifcaton without notce or liability. all informaton is subject to tt electronics own data and is considered accurate at tme of going to print. notes: (1) measured with input leads and output leads shorted. (2) rma fux is recommended. duraton can be extended to 10 seconds maximum when fow soldering. (3) derate linearly 1.66 mw/ c above 25 c. (4) ul recogniton is for 6kv dc for one minute absolute maximum ratngs (t a = 25 c unless otherwise noted) operatng temperature range - 40 c to +85 c storage temperature range - 40 c to +85 c input - to - output isolaton voltage (1)(4) 6 kvdc lead soldering temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron (2) 260 c input diode forward dc current 50 ma peak forward current (1 s pulse width, 300 pps) 3 a reverse voltage 2 v power dissipaton (3) 100 mw output phototransistor collector - emiter voltage opi7002, opi7010, opi7002rce, opi7010rce OPI7320RCE, opi7340rce 30 v 15 v emiter - collector voltage 5.0 v power dissipaton (3) 100 mw
optically coupled isolator opi7002, opi7002rce, opi7010, opi7010rce OPI7320RCE, opi7340rce ? tt electronics plc issue c 10/2017 page 3 tt electronics | optek technology 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.telectronics.com | www.optekinc.com general note tt electronics reserves the right to make changes in product specifcaton without notce or liability. all informaton is subject to tt electronics own data and is considered accurate at tme of going to print. electrical characteristcs (t a = 25 c unless otherwise noted) symbol parameter min typ max units test conditions input diode (see op140 or op240 for additonal informaton for reference only) v f forward voltage - 1.2 1.70 v i f = 10 ma i r reverse current - - 100 a v r = 2.0 v output phototransistor (opi7002, opi7010) (see op550 for additonal informaton for reference only) output photodarlington (opi7320, opi7340) (see op560 for additonal informaton for reference only) v (br)c eo collector - emiter breakdown voltage opi7002/rce, opi7010/rce OPI7320RCE, opi7340rce 30 15 - - - - v i c = 100 a, i f = 0 v (br)eco emiter - collector breakdown voltage 5 - - v i e = 100 a, i f = 0 i ceo collector - emiter dark current - - 100 na v ce = 10 v, i f = 0 coupled i c/ i f dc current transfer rato opi7002, opi7002rce opi7010, opi7010rce OPI7320RCE opi7340rce 20 100 200 400 - - - - - - - - % i f = 10 ma, v ce = 5 v i f = 10 ma, v ce = 5 v i f = 5 ma, v ce = 5 v i f = 5 ma, v ce = 5 v v (sat) collector - emiter saturaton voltage opi7002/rce, opi7010/rce OPI7320RCE, opi7340rce - - - - 0.4 1.0 v i f = 10 ma, i c = 0.50 ma i f = 5 ma, i c = 2 ma v iso isolaton voltage (1) 6 - - kvdc see note 1 t (on) turn - on time opi7002/rce, opi7010/rce OPI7320RCE, opi7340rce - - 4 150 - - s v ce = 10 v, i c = 10 ma, r l = 100 t (off) turn - of time opi7002/rce, opi7010/rce OPI7320RCE, opi7340rce - - 3 125 - - c io capacitance input - to - output (1) - 0.2 - pf v io = 0, f = 1 mh z notes: (1) measured with input leads and output leads shorted.
|
